UHPPOTE 433mhz Remote Control for Access Control Lock

REMOTE CONTROL RECEIVER Product Description The remote control receiver is designed to work with a working voltage of 12VDC and a frequency of 433MHz. It has 1 RF channel and uses DC Encoding Type Learning code, with support for up to 40 transmitters. The firing range is 160 feet in theory, but in reality, it ranges from 15%-30%. The working mode can be set to momentary or toggle, with an adjustable locking delay of 0/5/10sec. It features a built-in DC power connector for easy wiring and operates on OOK/ASK modulation to reduce interference.

EASY SETTINGS The device is user-friendly, with function switches located outside for easy setting of sound effects, working mode, and delay time. A built-in buzzer provides feedback on operation and can be turned off if needed. An expansion port is available to add an access control keypad, which can be purchased separately.

12V Power Adapter The 12V/1A power supply wall charger input can accommodate AC100V-240V 50/60Hz. The max output is DC12V / 1.2A, with a 4 feet / 1.2-meter AC cord length. The wire type is 22AWG, and the output transformer adapter measures 5.5 X 2.1 mm. The net weight of the adapter is 66g / 2.3oz.

PACKAGE LIST Included in the package are 1 remote control, 2 transmitters, 2 2-pin plugs, 1 power adapter, and 1 English user manual.

REMOTE TRANSMITTER The remote transmitter operates at 6VDC and has an operating current of 3mA. It is powered by 2 CR2016 batteries with a service life of 50000 cycles tested. The transmitting frequency is 433MHz, and it has 1 button for operation. The emission distance is 20-50m in an open area, with a fixed code encoding and ABS plastic case material.

Wired to Fail-Safe Lock: OPERATING SETTING To clear the code, tap and hold the RF icon for 8 seconds until the indicator changes from green to red. To pair the transmitter and receiver, tap the RF icon followed by pressing the button on the remote transmitter within 20 seconds. Note that the lock, exit button, and access keypad shown in the diagram are not included.

Overall, this kit offers the convenience of opening doors with a wireless RF remote and has adjustable settings for autolock time delay. It is specialized for access control locks and cannot be used in other fields. Additional transmitters can be purchased separately.

product information: