125KHz RFID Card Reader for Access Control Board

Product Description

Warm Tips: Before installation, please confirm the voltage (12VDC) and differentiate the positive anode and cathode of the power supply. When wiring the reader to the controller, use at least 22 AWG wire and ensure the length does not exceed 100 meters. If using external power, it is suggested to use the same power GND as the controller panel. A multi-strand twisted pair cable is recommended for connecting the card reader to the access controller. Avoid wiring the LED and BEEP wires unless light and buzzer feedback is necessary.

Wiegand Format: The standard 26-bit Wiegand format is widely used in the industry, consisting of 2 parity bits, an 8-bit facility code, and a 16-bit card number field. This format is accepted by most access control systems for connecting card swipe mechanisms.

Introduction: The RFID card reader requires a Wiegand protocol access controller to function, such as an access control panel or master controller. It utilizes an ST MCU for stable performance and features a low-power circuit for extended service life.

Features: - Maximum reading distance of 2-23/64" [6cm] - Waterproof design with IP66 rating - Suitable for safety door systems - Ultra-low power consumption with standby current less than 50mA - Supports Wiegand 26bits or Wiegand 34bits output format - Fast response speed with door opening time less than 0.3s - Built with a high-performance 32-bit MCU for stable performance

Specifications: - Working Voltage: 12VDC - Static Current: ≤50mA - Card Type: Standard EM-ID - Transmit Frequency: 125KHz - Working Temperature: -40 to +140°F - Working Humidity: 10%-90%RH - Waterproof Rating: IP66 - Enclosure Material: ABS Plastic - Panel Material: PC Plastic - Enclosure Color: Black - Button Material: Silicone gel - Enclosure Size: 3-25/64" x 3-25/64" x 45/64" - Communication Distance: Max. 328ft - Lead Cable Length: 9-27/32" [250mm] - Status Indication: Bi-color LED + Buzzer - Product Weight: 5.3oz - Certification: FCC - Wiegand Output: Wiegand 26 bit or Wiegand 34 bit (Selectable) - Buzzer: 1 beep for successful scan, 3 beeps for failed scan - LED Light: Red for standby, Green for activation

Package List: 1 x Wiegand Reader 1 x English User Manual 4 x Plastic Anchors 4 x #7 x 1" Self-Tapping Screw

Remarks: - Frequency: 125KHz - Card Type: EM-ID Card (Not compatible with HID, Cobra, APCiK, etc.) - Will only work with access control panel - Prompt sound and light indication only when LED and BEEP cables are connected

In conclusion, the RFID card reader is a reliable and efficient solution for access control systems, offering a range of features for various applications in different settings.

product information: